Channel Framed Mirror

Installation

• Position back plate with level and mark pre-drilled hole positions.


• Fasten back plate to the wall with the proper fasteners for your application.


• Slide keyholes on mirror down onto rivets on back plate.


• Pull string to engage locking mechanism. Cut string off.

Removal

• Take a putty knife or similar flat tool and push it against locking mechanism to release it from the back plate.


• Lift mirror off back plate.

Replacement

• After removal, repeat steps 3 & 4 from installation.

Angle Framed Mirror

Installation

• Position back plate with level and mark pre-drilled hole positions.


• Fasten back plate to the wall with the proper fasteners for your application.


• Center mirror in back plate, hold in position, and snap frame to back plate.

Removal

• Place tool adjacent to lug and pry frame away from back plate.

Replacement

• After removal, repeat step 3 from installation.

Company Profile

In 1960 Meek Manufacturing Company designed and patented the Theft Proof Snap Mirror Frame® to fill a need in the construction market. Since then Meek products have been installed in more than one million locations by over five thousand dealers.